Home > Product Catalog > Epoxies: Trowel Grade > FX-735

FX-735 Emergency Epoxy

MSDS Download

FX-735

DESCRIPTION:

FX-735 Emergency Epoxy is a moisture-sensitive, rapid setting, two component, 1:1 ratio epoxy adhesive. FX-735 sets in six minutes and can be put into service in one hour regardless of temperature. FX-735 Emergency Epoxy was designed to bond metals, glass, concrete and wood in a matter of minutes.

ADVANTAGES:

Rapid setting for emergency repairs
Cures in thin film at low temperatures
High physical properties at early ages
Bonds dissimilar metals
Trowel grade consistency

WHERE TO USE:

FX-735 Emergency Epoxy is excellent for repairing burst pipes, tanks and the like which contain liquid or gases. The rapid set of the material seals, cracks, and bonds broken pieces of metal and concrete.

PHYSICAL PROPERTIES:

"A" Component	White Paste
"B" Component	Black Paste
(mixed)	Gray
Weight per gallon	11 pounds mixed
Shore D Hardness	82
24 hours at	72°F (22.2 C)
Bond Strength
2 hours	3000 psi 20.7 MPa
24 hours	3600 psi 24.8 MPa

MIXING:

FX-735 Emergency Epoxy is thick paste. The "A" Component is white and the "B" Component is black. When mixed properly a medium gray paste is developed. This paste must be used in five minutes, therefore, never mix more than is usable in five minutes. Mix is a simple one to one volume ratio. FX-735 Emergency Epoxy can be applied vertically or overhead. FX-735 goes on very well with hand troweling. In cold weather, the material sets slower; in warm weather the material sets faster.

APPLICATION:

This system can be used in chemical and power plants, and in transportation systems, for immediate repairs. Typically, two (2) pints are mixed and placed as a plug or troweled over the area to be repaired.

SHELF LIFE:

2 years

LIMITATIONS:

Use only the amount that can be applied in five (5) minutes.

CAUTION:

"A" COMPONENT - FOR INDUSTRIAL USE ONLY! WARNING! May cause skin sensitization or other allergic response. Avoid inhalation of vapor. Use good ventilation. Prevent contact with skin and eyes. If skin is contacted, wash immediately with soap and water. If eyes are contacted, flush immediately with water and consult a physician. SPI CLASS 2 IRRITANT.

"B" Component - In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. Wash clothing before reuse. ANSI Class 2 IRRITANT.

WEAR PROTECTIVE CLOTHING, GOGGLES, GLOVES, AND/OR BARRIER CREAMS.

FOR INDUSTRIAL USE ONLY. KEEP AWAY FROM CHILDREN. 12/2004