Home > Product Catalog > Grouts: Polymer > FX-587

FX-587 Polyurethane Grout

MSDS Downloads

DESCRIPTION:

FX-587 Polyurethane Grout is a two-component polyurethane grouting material designed to cure at ambient temperatures into a resilient impact resistant grout. FX-587 is used to provide a flexible seal to prevent impact damage and vibration. FX-587 is moisture tolerant and can be applied to a damp substrate.

ADVANTAGES:

Excellent vibration control
Excellent adhesion to clean, properly-prepared surfaces.
Excellent water and chemical resistance properties.
Excellent electrical resistance properties.
Easy to use.

PHYSICAL PROPERTIES:

Color	Black
Solids, ASTM D 1353	100%
Hardness, Shore A	85
Tensile Strength ASTM D 412	3000 psi
Elongation ASTM D 412	300%
Adhesion to Concrete	1000 psi
Pot Life	20 minutes
Abrasion resistance	1.1
Volume Resistivity, ohm-cm	3.0 x 10¹²
Water Absorption ASTM D 570	0.1
Chemical Resistance	Excellent
Fungus Resistance	Non Nutrient
Service Temperature	-65 to 300°F

SURFACE PREPARATION:

Steel Surfaces: Steel surfaces should be dry abrasive blasted to a commercial gray metal finish as specified by the Steel Structures Painting Council SP-6. All work blasted shall be coated the same day with FX-408 Zinc Rich Primer. For immersion service, blast to near white surface SSPC SP-10.

Concrete Surfaces: Concrete surfaces shall be cleaned to remove dirt, curing compounds, existing coatings or laitance to provide a clean, sound bonding surface. Cleaning may be accomplished with FX-Masonry Cleaner and water blasting, acid etching or other methods that would achieve a similar result.

MIXING:

FX-587 is a preproportioned unit. Add 1 quart "B" Component to 5 gallon pail containing "A" Component, mix with a low speed drill (300 to 600 rpm) and FX-Mixing Paddle for two (2) minutes. Scrape sides and bottom of container to make sure all material is mixed. Add premeasured (40lb bag) of FX-587 Filler to mixed resin and mix thoroughly for an additional two (2) minutes and place immediately.

YIELD:

A four (4) gallon unit will yield 890ą cubic inches of grout.

PACKAGING:

Preproportioned kit with 1.8 gallons of "A" Component packaged in a 5 gallon paiil and .25 gallons of "B" Component packaged in a 1 quart container. FX-587 Filler is packaged in plastic lined 40 lb. bag.

SHELF LIFE:

6 months

LIMITATIONS:

Do not use on wet surfaces. Do not use below 40°F. Mix only what can be used in fifteen (15) minutes.

CAUTION:

Contains Polymeric isocyanates. Avoid contact with skin and eyes. May cause skin irritation. Avoid breathing vapor, may cause respiratory sensitization use with proper ventilation or proper breathing apparatus.

FIRST AID:

Skin:
Wash thoroughly with soap and water.

Eyes:
Flush with water for at least fifteen (15) minutes. If irritation persists, seek medical attention.

Inhalation:
Remove victim to fresh air, seek medical attention.

FOR INDUSTRIAL USE ONLY. KEEP AWAY FROM CHILDREN. 11/2006