- Bonding Agents
- Coatings, Primers & Sealers
- Curing & Hardening Compounds
- Epoxies: Low Viscosity
- Epoxies: Epoxy Repair Compounds
- Epoxies: Trowel Grade
- Fiberglass System & Shapes
- Grouts: Cementitious
- Grouts: Epoxy
- Grouts: Polymer
- Grouts: Polyurethane
- Membranes
- Polyurea
- Sealants
- Admixtures
- Bearings
- Miscellaneous
Home > Product Catalog > Miscellaneous > FX-707
FX-707 Synthetic Traction Crystals
DESCRIPTION:
FX-707 Synthetic Traction Crystals are a hard, polymeric aggregate used in coatings to provide slip resistant properties. It is non-hazardous and easy to use. Mix the recommended quantity of FX-707 into the coating just prior to application. The low specific gravity of FX-707 keeps it in suspension while being applied; eliminating the need to continuously restir the coatings.
ADVANTAGES:
- Provides uniform non-skid properties to coated surfaces.
- Non-Settling - Remains in suspension after addition.
- Compatable with most commercially marketed coatings.
- Non-Toxic, no crystalline silica.
WHERE TO USE:
Epoxy coatings, urethane coatings, acrylics, waterbased coatings. For slip resistance on stair treads, floors, parking areas and other areas where non-slip is required.
PHYSICAL PROPERTIES:
Specific Gravity |
1.30 |
Color |
White, Blends in to take color of coating |
Hardness, Rockwell |
M95-100 |
Water Absorption |
0.7% |
Size |
40 mesh |
APPLICATION:
The amount of FX-707 will vary, depending on degree of slip resistant properties desired. Start with 1/2 pound per gallon of coating. Stir well into coating for (2) two minutes; apply coating immediately. The coating may then be used as long as the pot life is not exceeded.
FOR INDUSTRIAL USE ONLY. KEEP AWAY FROM CHILDREN. 1/2002