• Bonding Agents
• Coatings, Primers & Sealers
• Curing & Hardening Compounds
• Epoxies: Low Viscosity
• Epoxies: Epoxy Repair Compounds
• Epoxies: Trowel Grade
• Fiberglass System & Shapes
• Grouts: Cementitious
• Grouts: Epoxy
• Grouts: Polymer
• Grouts: Polyurethane
• Membranes
• Polyurea
• Sealants
• Admixtures
• Bearings
• Miscellaneous

Home > Product Catalog > Epoxy Repair Compounds > FX-3120 HT

FX-3120 HT High Temperature Epoxy

Download PDF of FX-3120 HT

DESCRIPTION:

FX-3120 High Temperature Epoxy is a ceramic filled two component, 100% solids epoxy resin system. FX-3120 High Temperature Epoxy is pourable and easily mixed. The mix ratio is 1A to 1B by volume and 100A to 131B by weight.

ADVANTAGES:

• 100% solids, no V.O.C. emission
• Convenient 1 to 1 mix ratio
• Temperature resistance up to 400°F
• High Strength

PHYSICAL PROPERTIES:

Color	Gray
Mix Ratio	1A:1B
Pot Life	50 mins. @ 75°F 25 mins. @ 90°F

Compressive Strength (ASTM D 579)
	24 hours RT + 2 hours 200°F	12,500 psi
	24 hours RT	6,500psi
	7 days	13,500 psi
Shore D Hardness (ASTM D -2240)
	24 hours RT	79
	24 hours RT + 2 hours 200°F	85
	7 days RT	85
Tensile Strength (ASTM D 638)		14 days

MIXING:

Combine 1 part by volume of Component "A" with 1 part by volume of Component B (mixing ratio) for not less than 3 minutes, using a slow-speed drill (300 to 600 rpm) and FX-Mixing Paddle for a uniform gray-colored mixture with no streaks. Avoid entrapping air in mixture and apply to properly prepared surface immediately. Spreading into thin layers extends the pot life of the mixture.

APPLICATION:

Surface must be clean and sound. FX-3120 HT Epoxy may be applied to dry, damp or wet surfaces, but not in standing water. Post cure the material at 200°F for two hours.

LIMITATIONS:

Do not use when ambient temperature is below 40°F.

CAUTION:

"A" Component—Contains Epoxy Resin. May cause skin sensitization or other allergic responses. Avoid inhalation of vapor. Use good ventilation, particularly if material is heated or sprayed. Prevent all contact with skin and eyes. If skin is contacted, wash immediately with soap and water. If eyes are contacted, flush immediately with water and consult a physician.

"B" Component—Contains Amine Compounds. In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. Wash clothing before reuse. Discard contaminated shoes.

Wear protective clothing, goggles, gloves and/or barrier creams

FOR INDUSTRIAL USE ONLY. KEEP AWAY FROM CHILDREN. 1/2002