Home > Product Catalog > Coatings, Primers & Sealers > FX-214

FX-214 Polymer Cementitious Coating

DESCRIPTION:

FX-214 Polymer Cementitious Coating is a two-component polymer cementitious coating with an excellent consistency for use on concrete, brick, stucco, or stone. Component A is a white emulsified polymer solution. Component B is a select blend of cementitious materials.

ADVANTAGES:

FX-214 is a premeasured, pre-proportioned coating recommended for use above or below grade on concrete, masonry, mortar, stone, or steel. It permits breathing and does not encapsulate moisture. FX-214 resists salt intrusion when used as a protective coating.

FX-214 is not a solvent type system, and is non-flammable. It may be applied by brush, roller, or spray. All spray equipment must employ traps to prevent water and oil from contaminating the coating and the surface. FX-214 is easily applied to a clean, sound substrate. It increases resistance to deicing chemicals, and has good freeze/thaw resistance.

PHYSICAL PROPERTIES:

Color	White & Gray (Standard Colors) Other colors available upon request
Working Time	70 lb. unit @ 72°F temperature when mixed has a working life of 1 1/2 hours
Drying Time	75°F - 30 to 45 minutes
Coverage
Smooth surface first coat	150 to 200 sq. ft. per gallon
Coarse surface such as stucco	75 to 125 sq. ft. per gallon
Compressive Strength (ASTM C-109)
3 days 7 days	5,500 psi 6,700 psi
Bond Strength (ASTM C-882)	Break in Concrete Hard to Hard
Moisture Vapor Transmission (ASTM E-96-53)	Permits breathing (does not encapsulate moisture)
Abrasion Resistance (ASTM C-968)	Similar to solvent based epoxy coating 50 to 60 liters/mil

MIXING:

Shake Component A well and pour 1/2 of A Component into mixing container. Add Component B while stirring with a low speed power drill 300 to 600 rpm using an FX-Mixing Paddle. Mix to a uniform paste, then add the necessary amount of the A Component to bring to the desired consistency.

APPLICATION:

For best results, apply to a clean, sound surface. After cleaning, dampen surface. After surface dries, apply at a thickness of 12 to 15 mils. Too thick of a coating may result in cracking. Surface temperature must be 45°F and rising when applied.

PACKAGING:

2.5 gallon unit:	1.5 gallons of Component A in 3 gallon plastic pail - 22.5 lbs. Component B powder in bag (mix in pail)
5 gallon unit:	3 gallons of Component A in 6 gallon plastic pail - 45 lbs. Component B powder in bag (mix in pail if 5 gallons will be used in 30 to 45 minutes)

SHELF LIFE:

One Year

LIMITATIONS:

Do not use material below 45°F. Do not apply in excess of 15 mils per coat. Do not mix more material than can be applied within 60 minutes. Prevent coating from freezing for 48 hours after application.

CAUTION:

WARNING! CONTAINS FREE SILICA & PORTLAND CEMENT. DO NOT BREATHE DUST. May cause delayed lung injury (silicosis) Follow O.S.H.A. safety and health standards for crystalline silica (quartz). Cement powder or freshly-mixed concrete, grout or mortar may cause skin injury. Avoid contact with skin and wash exposed skin areas promptly with water. If any cement powder or mixture gets into the eyes, rinse immediately and repeatedly with water and get prompt medical attention.

FOR INDUSTRIAL USE ONLY. KEEP AWAY FROM CHILDREN. 12/2004